Position GPS/GNSS Grande Précision GNSS Temps/Fréquence GPS/GNSS Antennes GPS/GNSS Accessoires GPS/GNSS
SSD & Solutions Flash Modules DRAM Cartes mémoires Flash Programmateurs Service programmation
Accessoires GPS/GNSS


GPS, GLONASS, Galileo Splitter,
4 way

Produit Naelcom


The NGA-GPS410 is a 4 way GPS signal splitter; DC pass 1 port, DC block 3 port w/ 200ohm load. Typically used for powering an active antenna thru 1 port while splitting the GPS signal.

NGA-GPS410 Splitter

NGA-GPS410 Technical Data

Electrical Specifications
Frequency range 1.000 - 2.000 GHz
Impedance 50 ohms
Insertion loss (max) 0.6dB (above 6.02dB split)
Amplitude balance (max) 0.3dB
Phase balance (max) 3 degrees
Isolation (min) 22dB
Input VSWR (max) 1.30:1
Output VSWR (max) 1.20:1
DC voltage (max) 10V
DC current (max) 50mA
Mechanical Specifications
Connectors SMA female (jack), 50 ohms
Connector body Brass, Tri-Alloy plate
Connector pin Beryllium Copper, Gold plate
Insulator PTFE, Virgin electrical grade
Housing Aluminium, clear chem conversion film, RoHS compliant (no Hex Chrom)
Solder Lead Free, RoHS compliant
Operating temp. -65°C to +85°C
Weight 383 grams
RF Input Power Rating (Power divider splitter)
Into matched load VSWR's In-phase 180° out-of-phase
1.2:1 20 Watts 20 Watts
2.0:1 20 Watts 10 Watts
10 Watts 1 Watts
RF Input Power Rating (Power Combiner)
Coherent signals (in phase) 4 x 5 Watts
Coherent signals (180° out-of-phase) 4 x 0.25 Watts
Non-coherent signals: 4 x 0.5 Watts
Physical Characteristics

© Naelcom 2016 - Conditions Générales de Ventes - Haut de la page