" Success is valuable only if you share it "
View larger 
NGA-LA35-T Amplifier 
GNSS L1 In Line Amplifier with 35dB Gain
- Timing and Synchronization
- Railways (DC Block for passive antennas)
- Telematics Systems
- Timing for Telecom, Base Stations
- For long cable run or splitters are used
- Reduce overall cost using cheaper cable
- Compensating losses
- Improves signal recetion
- No external voltage required
- Fits inside antenna mounting pipe
NAELCOM’s GNSS Low Noise in-line Amplifier NGA-LA35-T series with L1 band pass filter provides high gain (35dB typical) in cases where GNSS and antennas are separated by large distances. Long cables run require the use of low loss cable, heavy and costly cables. NGA-LA35-T will allow increasing cable length between the GPS antenna and a timing receiver.
NGA-LA35-T is available in two versions, one DC PASS powered by GPS receiver through antenna coaxial cable which accepts power from 3VDC to 10VDC, the other in DC Block which Block the DC from the GPS receiver and amplify the signal from the GPS passive antenna (Railway applications).
Due to his exceptional dimensions (75mm L x 18mm D) the NGA-LA35-T is cylindrical and can be installed inside most of antenna pipe mount and integrated with cables in-line.
NGA-LA35-T series is rugged and weatherproof (IP67), corrosion resistant (Stainless steel housing).
| Description | Part-Number |
|---|---|
| NGA-LA35-T Amplifier | NGA-LA35-T-GNSS-DCx |