" Success is valuable only if you share it "
View larger 
Lassen™ iQ form factor 
Lassen™ iQ form factor OEM board based on TRIMBLE Copernicus II
- Ultra-high sensitivity of -160dBm (-190dBw), enabling high performance acquisition and tracking in urban canyon and signal obscured environments
- SBAS support (WAAS, EGNOS), for improved Horizontal and Altitude accuracy.
- Cold Start Time to First Fix (TTFF) is quicker than 38s.
- Low power consumption: 49mA @ 3.3V, with Power-Good LED.
- The 2 ports that can be configured to suit the customer’s requirements such as: input and output protocols and transmission speed rate.
- Configuration parameters backed-up to an EEPROM.
- Pin to pin compatible with Trimble™ Lassen™ iQ GPS receiver; same form factor for easy integration.
- Communication port outlet in 3.3V TTL level
- Protection against open and/or short circuit on the antenna.
- Accurate pps (pulse per second signal), better than 60ns.
- Self-Survey for static applications
The NLC-iQ-CP2-3Pxxx has been developped to replace famous TRIMBLE Lassen™ iQ after EOL, based on Copernicus OEM receiver, fully compatible mechanically, power and TTL signal level.
Designed for use in embedded and industrial applications requiring high accuracy on both positionning and Timing.
NLC-iQ-CP2-3Pxxx is ideal candidate for your applications when an OEM module is not mandatory. Use of daugther boards trully simplify integration, those can be replaced easily when GPS/GNSS module shoud be replaced for any reason (WNRO, updgrade to new GNSS constellation, Firmware upgarde required...), you do not need to re-design full printed circuit board.
iQ clone family board is also available with different embedded GPS/GNSS receivers, depending what are your needs : Timing, positionning, DR.
Do not hesitate to contact us for any new requirement or features.
| Description | Part-Number |
|---|---|
| Lassen™ iQ form factor | NLC-iQ-CP2-3Pxxx |